Hello, everyone, i have just acquired a Baby loop and on connecting to my DX10 it will not sync with the VFO, i have checked and triple-checked the board rate. I have tried it on my Yaesu FTDX101d to and no joy. I'm using a straight-through cable and running the latest version on each radio the Ciro tuner is running 4.6. Any help greatly appreciated
Thanks David (M0TPT)
Hello, please have a look to the homepage, where the firmware versions are visible & ready for download. The version CML_409.tes was explicitly designed for the latest Yaesu radios and the function is confirmed by all users. However you have to know, that during the set-up in the ATU2 after the upgrade, you'll have to scoll down beyond CAT MODE 2 to CAT MODE 3. Decide for "3" !